LPJ0011CNL RJ45 Single Port , Female Jack 10/100Mbps Ethernet Cross 13F-64ND2NL
1 x 10/100 Mbit Ehternet
1X1 Tab-down
RJ45 modular jack
Angled Rj45 Connector
Magnetic designs to support every PHY
Meet or exceed IEEE 802.3 and ANSI X3.263 standards
including 350uH min OCL with 8mA bias
Minimum 1500Vrms isolation per IEEE 802.3 requirement
Designed for 100 base transmission over UTP-5 cable
Size same as RJ-45 modular jack to save PCB board Space
13F-64ND2NL= LPJ0011CNL
ELECTRICAL SPECFICATIONS: @25℃
1.Turn Ratio(±2%): TX=1CT:1 RX=1CT:1 2.Inductance OCL: 350uH MIN @ 100KHz 0.1V 8mA DC Bias 3.Insertion Loss: -1.0dB MAX @ 1.0-100MHz 4.Return Loss: -18dB MIN @ 1-30MHz -15dB MIN @ 30-60MHz -12dB MIN @ 60-80MHz -10dB MIN @ 80-100MHz 5.Cross talk: -40dB MIN @ 30MHz -35dB MIN @ 60MHz -30dB MIN @ 100MHz 6.Common Mode Rejection: -40dB MIN @ 30MHz -35dB MIN @ 60MHz -30dB MIN @ 100MHz 7.Hipot: 1500Vrms 8.Operating Temperature Range:0℃ TO 70℃
NOTES: 1.Designed to support application,such as SOHO(ADSL modems),LAN-on-Motherboard(LOM),hub and Switches. 2.Meets IEEE 802.3 specification 3.Connector Materials: Housing:Thermoplastic UL94V-0 Contact/Shield: Copper alloy Shield plating: Nickel Contact plating: Gold 6 micro-inches min.In contact area. 4.Wave solder tip temperature: 265℃ Max Wave solder tip temperature time: 5 Sec Max