LINK-PP INT'L TECHNOLOGY CO., LIMITED
LINK-PP INT'L TECHNOLOGY CO., LIMITED
Add to Cart
Details:
Core material Ferrite
Environment RoHS compliant, halogen free
Terminations Tin-silver-copper over tin over nickel over phos bronze
Weight 6.5 – 8 g
Ambient temperature –40°C to +125°C
Maximum part temperature +165°C (Ambient + temp rise)
Storage temperature Component: –40°C to +165°C
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
| Specifications | Power (W) | Inductance at 0A(µH) | Tolerance(%) | Isat(A) | DCR max (mΩ) | ||
| Pri | Sec | Aux | |||||
| POE51Q-50ED | 51 | 26.7@±10% | 10 | 4.5 | 66 | 4 | 102 |
| Leakage Inductance max (µH) | Turns Ratio | Isolation Voltage (Vrms) | Secondary Output (V, A) |
| Pri : Sec : Aux | |||
| 0.25 | 1 : 0.143 : 0.5 | 1500 | 5 V, 9.3 A |
• Developed for Flyback DC/DC PoE PD power converters up to 51 W
• Designed to meet the upcoming IEEE802.3bt standard and operates with 36 – 57 V input
• 1500 Vrms, one minute isolation (hipot) between primary and auxiliary to secondary.
• Perfect solution for high power PoE applications including Smart Building and IoT
• AEC-Q200 Grade 1 (–40°C to +125°C)
1. Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic tape (150 parts per full reel).
Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
2. Inductance is for the primary, measured at 250 kHz, 0.5 Vrms, 0 Adc.
3. Leakage inductance is for the primary with the secondary and aux windings shorted.
4. DC current at 25°C that causes an inductance drop of <15% (POExx51Q) and <15% (POExx40Q) from its value without current.
5. Output is for the secondary. Output of the aux winding is 12 V, 30 mA.
6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
