LINK-PP INT'L TECHNOLOGY CO., LIMITED
LINK-PP INT'L TECHNOLOGY CO., LIMITED
Add to Cart
1.RJ45 1X1 RJ45 Female Jack Tab-up
2.Through Hole
3.10/100/1000 Base-T
4.Contact Area : Gold Flash
MAG., REVERSE LATCH , LED optional, EMI-finger Optional.
5.Designing Model: 【HR915350C】
6.Mass Production Model:【LPJG16515A4NL】
| Shielded 1x1 Port 8P8C RJ45 Female Connector with 10/100/1000 Base-T Integrated Magnetics, Orange&Green/Yellow LED,Tab UP,RoHS | |
| LINK-PP Part Number | LPJG16515A4NL |
| Tyco Part Number | HR915350C |
| Application-Lan | ETHERNET(NoN PoE) |
| AutomDX | YES |
| Bst Circuit | YES |
| Configuration RX | T,C |
| Configuration TX | T,C |
| Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Cores per Port | 8 |
| Diodes | NO DIODES |
| LED Option | Yellow&Green/Yellow&Green LEDs |
| Latch | TAB UP |
| Number of Ports | 1X1 |
| PCB | FR4 |
| PCB Mount Angle | SIDE ENTRY |
| PCB Retaining Post | T POST |
| Package Height (Inches) | 0.531 |
| Package Height (mm) | 13.50 |
| Package Length (Inches) | 0.839 |
| Package Length (mm) | 21.30 |
| Package Width (Inches) | 0.628 |
| Package Width (mm) | 15.95 |
| Pin Type | THT SOLDER |
| RoHS Compliant | YES-RoHS-5 WITH LEAD IN SOLDER EXEMPTION |
| Search | YES |
| Shield EMI Tabs | With |
| Speed | 10/100/1000 Base-T |
| Temperature | 0 TO + 70℃ |
| Turns Ratio RX | 1CT:1CT |
| Turns Ratio TX | 1CT:1CT |
Used for networking and communication equipments such as HUB, PC card, Switch, Router, PC Mainboard, SDH, PDH, IP Phone, xDSL modem,Call Center solutions , Complex set top boxes , VOIP gateways setup,Border Gateway Protocol,fast ethernet switch ...
18 years production experience,
2600 staff,
100% test
Flexible delivery time
Design for Ti , Intel , Samsung , Fluke , Jabil , Flextronics ,Cypress, Freescale,EKF.......
Built-in Flexible PCB Assembly; Rigid-Flexible PCB Assembly; Microelectronic, Flip Chip; Microelectronic, Chip On Board; Optoelectronic Assembly; RF / Wireless Assembly; Through Hole Assembly; Surface Mount Assembly; System Assembly; Printed Circuit Board Assembly
FAQ
1.Are you the real manufacturer?
Yes. We are the real manufacturer since 1997.
2.Can you accept small order?
Yes, small order is available .We support new project of our customers as we know business is always from
small order.
3.Which kind of certification you have ?
ISO9001, SGS, UL, RoHs.
4.What is your delivery time?
Usually within 2-3 working days
5.What is your payment way?
T/T, L/C, D/P,MoneyGram,Western Union and Paypal.
6.Can you supply customized products and logo?
Yes. We supply OEM&ODM service. You can send us your drawing.
