LINK-PP INT'L TECHNOLOGY CO., LIMITED
LINK-PP INT'L TECHNOLOGY CO., LIMITED
Add to Cart
| LINK-PP Part Number | LPJG4926GENL |
| RJ45 Connector Datasheet | LPJG4926GENL.pdf |
| Application-Lan | ETHERNET(PoE+) |
| Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Cores per Port | 8 |
| Diodes | NO DIODES |
| LED Option | GREEN/YELLOW |
| Latch | TAB DOWN |
| Number of Ports | 1X1 |
| PCB Mount Angle | SIDE ENTRY |
| Height (mm) | 13.30 |
| Length (mm) | 21.25 |
| Width (mm) | 15.93 |
| Pin Type | THT SOLDER |
| RoHS Compliant | YES-RoHS-5 WITH LEAD IN SOLDER EXEMPTION |
| Search | YES |
| Shield EMI Tabs | WITH |
| Speed | 1000 BASE-T |
| Temperature | - 40 TO + 85℃ |
| Turns Ratio RX | 1CT:1CT |
| Turns Ratio TX | 1CT:1CT |
Founded in 1997, LINK-PP has become a global leader in designing and manufacturing magnetic network components and optical transceiver modules. With over 2,600 employees and a monthly production capacity of 6 million units, LINK-PP serves over 100,000 customers in more than 200 countries around the world. An extensive catalog of standard models and customized products enables LINK-PP to meet the needs of OEMs, ODMs and CEMs globally.
1000BASE-T may also be called Gigabit Ethernet, 1000BaseT, GbE, 1 GigE or simply Gigabit. It is located at the first layer of the open systems interconnection model, the physical layer. Is a networking standard defined by the Institute of Electrical and Electronics Engineers (IEEE) in 1999 based on the 802.3ab standard. The "1000" in 1000BASE-T refers to a transmission speed of 1,000 megabits per second (Mbps). "BASE" indicates that the standard operates in Ethernet baseband signaling mode, and "T" indicates using twisted pair copper cables.
1000BASE-T is Gigabit Ethernet - 1 Gigabit is 1,000 megabits per second (Mbps) over copper cable, using four pairs of Category 5 (Cat5) unshielded twisted pair (UTP) to achieve gigabit data rates. 1000BASE-T can be used in the data center for server interconnect or network switch uplinks, or directly with the desktop. One of the great advantages of 1000BASE-T is that it can use existing copper cabling rather than having to rewire it with fiber optics or new-generation cables.
1000BASE-T is the most common networking standard. Gigabit Ethernet quickly replaced older Ethernet standards such as Ethernet (10BASE-T, 10 Mbps) and Fast Ethernet (100BASE-T, 100 Mbps) as the de facto standard for network equipment. Almost all modern devices support it, providing good enough performance for most common applications. 1000BASE-T is used for general server interconnect and endpoint client connections.