LINK-PP INT'L TECHNOLOGY CO., LIMITED
LINK-PP INT'L TECHNOLOGY CO., LIMITED
Add to Cart
| Specifications: | FCLF-8521-3 |
| Product Class: | Fiber Optics |
| Product Family: | Optical Transceivers |
| Product Series: | SFP |
| Product Name: | SFP Optical Transceivers |
| Status Available: | Active |
| RoHS: | RoHS-6 Compliance |
|
Specifications:
|
|
|
Data Rate: |
1.25 Gbs |
| Wavelength: | - |
| Maximun Distance: | - |
| Fiber Type: | Singlemode Glass |
| Emitter: | DWDM EML |
| Voltage-Supply: | 3.3V |
| Applications: | Ethernet |
| Connector Type: | RJ45 |
| Mounting Type: | GBIC |
| Lead Free Status / RoHS Status: | Lead Free / RoHS Compliant |
| Moisture Sensitivity Level(MSL): | 1 (Unlimited) |
|
Feature Description:
|
● Up to 1.25Gb/s bi-directional data links
● Hot-pluggable SFP footprint
● Extended case temperature range -0°C to +85°C
● Fully metallic enclosure for low EMI
● Low power dissipation (1.05W typical)
● Compact RJ-45 connector assembly
● RoHS-6 compliant (lead-free)
● Access to physical layer IC via 2-wire serial bus
● 10/100/1000 BASE-T operation in host systems with SGMII interface
● 1.25 Gigabit Ethernet over Cat 5 cable
|
Description:
|
● FCLF-8520/8521-3 1000BASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA) . They are compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.3 . The 1000BASE-T physical layer IC (PHY) can be accessed via I2C, allowing access to all PHY settings and features.
● The FCLF-8520-3 uses the SFP’s RX_LOS pin for link indication, and 1000BASE-X autonegotiation should be disabled on the host system. The FCLF-8521-3 is compatible with 1000BASE-X auto-negotiation, but does not have a link indication feature (RX_LOS is internally grounded). See AN-2036 (“Frequently Asked Questions Regarding Finisar’s 1000BASE-T SFPs”) for a more complete explanation on the differences between the two models and details on applications issues for the products.
● The optical transceiver is compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details.