LINK-PP INT'L TECHNOLOGY CO., LIMITED
LINK-PP INT'L TECHNOLOGY CO., LIMITED
Add to Cart
1. Match FCC standards.
2. Compliance with the requirement of IEEE802.3u standards.
3. The RJ45 connector is integrated with the transformer, impedance resistor, and high-voltage capacitor.
4. Size same as RJ-45 connector to save PCB board space.
5. Reduced EMI radiation to improve EMI performance.
6. Design for 10/100 BASE transmission over UTP-5 cable.
7. Compliance with ROHS requirements.
8. Operating temperature range: 0℃ to +70℃.
9. Storage temperature range: -25℃ to +85℃.
| Part Number | 0811-2X8R-19-F |
| Series | RJ45 MagJack |
| Part Status | Active |
| Manufacturer | LINK-PP |
| Number of Ports | 16 |
| Number of Rows | 2 |
| Number of Cores per Jack | 4 |
| Tab Direction | Up and Down |
| Applications | 10/100 Base-T, AutoMDIX |
| LED | Without |
| EMI Finger | With |
| Shielded | YES |
| Mounting Type | Through Hole |
| Orientation | 90° Angle (Right) |
| Height Above Board | 1.004" (25.50mm) |
| Features | Board Guide |
| Contact Material | Copper Alloy |
| Contact Finish | Gold |
| Contact Finish Thickness | 50.0µin (1.27µm) |
| Shield Material | Copper Alloy |
| Housing Material | Polybutylene Terephthalate (PBT) |
| Packaging | Bulk |
| ELECTRICAL CHARACTERISTICS 25℃ | |
| TURNS RATIO | 1CT:1CT ±3% |
| RETURN LOSS (MIN.) | 1MHZ-30MHZ: -18 dB 60MHz-80MHZ: -12 dB |
| INSERTION LOSS | 100KHZ T0 100MHZ: -1.1 dB |
| OCL | 350uH MIN, @0.1V,100KHZ 8MA DC BIAS |
Designed to support applications, such as ADSL modems, and LAN-on-Motherboard. Networking and communication equipment such as HUB, PC card, Switch, Router, PC Mainboard, SDH, PDH, IP Phone, xDSL modem, Call Center solutions, Complex set-top boxes, VOIP gateways setup, Border Gateway Protocol, fast ethernet switch ...
Design for Ti, Intel, Samsung, Fluke, Jabil, Flextronics, Cypress, Freescale, EKF